FYZ1389 DC12V Two-way Controller Wireless Remote Control Transmitter Set

1, FYZ1389 DC12V two-way controller wireless remote control transmitter set, suitable for prevention of homes, offices, shopping malls, hotels, hospitals, warehouses and fluorescent lights, etc., energy-saving, by controlling the opening and closing of electrical incandescent lamps, halogen lamps and water heater. You can use the wireless remote control with different codes to learn the chip 1527 or 2262
2. Product parameters:
Receiver:
Working voltage: DC12V,
Working current: 10A,
Operating frequency: 433 MHz,
Receive sensitivity: -108dBm,
Working temperature: -20 Deg.C + 70 Deg.C ( -4 Deg.C 158 Deg.C ),
Output: switching signal / voltage output,
Code form: learning,
Static current: 8mA and less
Launcher:
Input voltage: DC10 - 14V,
Hold current: more than 5ma, 433="" more than 90dBm,
Remote control distance: more than 100 meters ( in an open environment ),
Decoding form: MCU software decoding,
The remote control number can be stored: 50,
Support remote control type: fixed code, learning code,.
Channel: 2 channels,
Multiple operating modes: ( trotting / non-engaging, interlock / lock, self-locking / locking, delay ),
Wiring method: fixed terminal block,
Working voltage: DC12V,
Output current: 10 a,
Output: normally open, normally open, normally closed
3. Running mode / output: jogging / no meshing: press a button is working / open. Release your finger on the same button. The channel switch requires remote button control. Auto lock / auto lock: Press one button to work once. Pressing the same button again is stopped/closed. The channel switch requires remote button control.
Interlock / Hook: Press the button that is running / opening and press another button to stop / close. The channel switch requires 2 remote control buttons. Delay: press the remote control relay, release the remote control and start the hold time after 5s, 10s, S15 will automatically close the relay
Material: plastic + electronic components